<![CDATA[Need2Print - Suppliers of Cheap Printer Cartridges - Blog]]>Tue, 07 Oct 2025 20:52:45 +0000Weebly<![CDATA[Low toner message - Brother MFC-9330CDW - Reset Toner Cartridge]]>Mon, 31 Oct 2022 12:17:52 GMThttps://www.need2print.net/blog/low-toner-message-brother-mfc-9330cdw-reset-toner-cartridgeBrother MFC-9330CDW - Reset Toner Cartridge


The Brother MFC-9330CDW has a process to manually override the "Toner Empty" message, and reset the toner cartridges.
  1. Ensure the printer is switched on.
  2. Open the printer lid to reveal the toner cartridges.
  3. Press and hold the Asterisk key for five (5) seconds.
  4. The LCD should display a new menu.
  5. Select the cartridge you wish to reset, K = Black, C = Cyan, M = Magenta, Y = Yellow
  6. STD = Standard Capacity Cartridge, HC = High Capacity Cartridge, SHC = Super High Capacity Cartridge.
  7. Reset? Will appear on the screen Select "Yes".
  8. Close the printer lid.


Brother MFC-9330CDW - Reset Drum
After installing a new drum unit, the printer needs to be reset.
  1. Press "X" to clear the error message.
  2. Press the tools button (picture of a spanner).
  3. Press "All Settings".
  4. Press "Machine Info".
  5. Press "Parts Life".
  6. Press "#" until the touch screen message changes.
  7. Press the colour of the drum that was replaced.
  8. Press "Yes".
]]><![CDATA[Cargo containers causing printer cartridge stock issues]]>Mon, 18 Oct 2021 19:06:31 GMThttps://www.need2print.net/blog/cargo-containers-causing-printer-cartridge-stock-issuesDue to stock replenishing issues, it could become a problem getting your cartridge in stock over the winter period. We are currently well stocked but I know the warehouses are experiencing shortages.  Please don't leave it until the last minute to order your Printer ink and toner cartridges.]]><![CDATA[Second Lockdown - We are still delivering printer cartridges, as usual.]]>Sat, 07 Nov 2020 09:25:15 GMThttps://www.need2print.net/blog/second-lockdown-we-are-still-delivering-printer-cartridges-as-usualPlease call 03333442288 or order online at www.need2print.net for FREE Delivery.

]]><![CDATA[Cartridge shortages]]>Fri, 05 Jun 2020 10:19:01 GMThttps://www.need2print.net/blog/cartridge-shortagesDue to the pandemic certain printer cartridges are in short supply
At Need2Print we have done our best to keep a good stock of cartridges. We are finding HP printhead cartridges are particually difficult to restock, subsequently our suppliers have had to increase prices.

We have stock of Compatible HP cartridges including the 304, 302 & 301
]]><![CDATA[HP 304 304XL Printer Cartridges - We have stock!]]>Wed, 20 May 2020 19:08:51 GMThttps://www.need2print.net/blog/hp-304-304xl-printer-cartridges-we-have-stock
​304 and 304XL cartridges are currently in short supply from the manufacturers.
They are a very popular cartridge going in many of the latest HP printers.
Click for Compatible 304XL 
Click for HP Original 304 Twinpack
Suitable for use in HP Printers:
HP Deskjet 2620
HP DeskJet 2622
HP Deskjet 2630
HP Deskjet 2632
HP Deskjet 2633
HP Deskjet 2634
HP Deskjet 3700
HP Deskjet 3720
HP Deskjet 3730
HP Deskjet 3732

HP Deskjet 3733
HP Deskjet 3735
HP Deskjet 3750
HP Deskjet 3760
HP Deskjet 3762
HP Envy 5010
HP Envy 5020
HP Envy 5030
HP Envy 5032
HP Envy 5050
]]><![CDATA[RESET Counter on Brother DR3400 Drum for HL-L6400DW Printers]]>Wed, 22 Apr 2020 10:36:43 GMThttps://www.need2print.net/blog/reset-counter-on-brother-dr3400-drum-for-hl-l6400dw-printers
Picture
]]><![CDATA[HP 903XL and 953XL Compatible Cartridges - Disable your firmware updates]]>Wed, 18 Mar 2020 15:48:33 GMThttps://www.need2print.net/blog/hp-903xl-and-953xl-compatible-cartridges-disable-your-firmware-updatesHP have updated the firmware on printers that take these cartridges.

IMPORTANT PRODUCT INFO
There has been another firmware update issued for printers using HP 953XL and 903XL inkjets. Users are first asked to accept this update. If they do, current versions WILL NOT WORK.

These are the new firmware numbers that will not work:
Hp 953: 2006BR/A
Hp 903: 2006BR
Firmware versions can be checked in the printers menu in the settings
Disable automatic firmware updates.

Original HP cartridges will still work.
]]><![CDATA[Low Toner light on a Brother MFC-L2700DW or MFC-L2700DN Printer - TN2320]]>Sun, 23 Feb 2020 13:01:50 GMThttps://www.need2print.net/blog/low-toner-light-on-a-brother-mfc-l2700dw-or-mfc-l2700dn-printer-tn2320Troubleshooting TN2320 Cartridges
You know your cartridge is full but the low toner keeps coming on. Try this, the printer just needs to be reset.
Reset Brother MFC-L2700dw Toner
Open the front cover and leave open while completing the following steps.
Display should read “Front Cover open”.
Hold the ‘OK’ button down for a few seconds.
Display should read “Replace Drum”.
DO NOT follow prompts on screen.
Type in * 0 0 (Star Zero Zero) on the keypad.
Close the cover. Your toner is now reset.

TN2320 Cartridges

]]><![CDATA[HP 932XL and 933XL not recognising in your printer?]]>Sun, 23 Feb 2020 12:47:04 GMThttps://www.need2print.net/blog/hp-932xl-and-933xl-not-recognising-in-your-printerTroubleshooting
​Hp  Compatible 932XL, 933XL, 950XL, 951XL, 920XL, 940XL, 934XL, 935XL, 953XL chips not recognising, or error messages etc..

HOW TO FIX......
1. Take out the non-recognising cartridge, switch off the printer for 30 seconds, turn on the printer and reinstall the cartridge.
or
2. Reinstalling the cartridge rotates the serial no. Users can do it up to 5 times EACH INK. This usually solves any issues, as its unlikely you have changed the inks so many times that the printer has seen all 5 serial numbers on each of those cartridges before.
It is vital that if they get a failure message or non-recognising cartridge you must take the offending ink out and reinstall it up to 5 times. To be sure that it has attempted all 5 serial numbers on each cartridge.

If there is still a failure its best to exchange the ink, as its likely that the chip is faulty or the replacement will be from a different batch and therefore have 5 more different serial numbers on it.
]]><![CDATA[Brother Printer - Low toner]]>Wed, 19 Feb 2020 09:51:56 GMThttps://www.need2print.net/blog/brother-printer-low-tonerSo you’ve just replaced your Brother toner cartridge in your printer and the 'toner low' or 'replace toner' warning keeps popping up. ​
You’ve tried everything. You’ve taken the toner cartridge out and checked everything is working and all the packaging has been removed. You’ve shaken the cartridge from side to side. You’ve even switched the printer on and off and nothing is making that irritating little message go away. There’s nothing in the user manual to tell you what to do. And worst of all, even though you know the toner cartridge is new, the printer still won’t let you print!So you’ve just replaced your Brother Toner cartridge in your printer and the 'toner low' or 'replace toner' warning keeps popping up.


Relax. Most Brother toner printers need to be told you’ve replaced the toner cartridge. You’ll have to manually reset the counter and, luckily, this is fairly easy to do. We’ve put together a handy list of Brother toner printers and how to reset the toner count on them.

To reset the 'Toner Life End' / 'Replace Toner' message on Brother HL monochrome (black and white) printers:
Open the front cover and leave it open while completing the following steps.
Turn the printer off.
Hold the ‘go’ button (or ‘start’ button) while turning the printer on. All panel lights should be on.
Release the ‘go’ button (or ‘start’ button).
Press the ‘go’ button (or ‘start’ button) 2 times.
Pause. All panel lights should be on.
Press the ‘go’ button (or ‘start’ button) 5 times. The toner light should be off (the error may be flashing). The paper light should be on or flashing.
Close cover. The ready light should be the only light on.

To reset the ‘Toner Life End’/'Replace Toner' message on Brother MFC monochrome (black and white) printers:
Open the door and press the Clear/Back key
Press *00
Press OK
Do not choose anything for drum replacement. When the drum replacement menu comes up, press * and then 00, then press OK.​
To reset the ‘Toner Life End’ / ‘Replace Toner’ message on Brother DCP, MFC and HL colour printers:


With the printer powered on, open the toner access door. (You will see a ‘Cover is Open’ message on the LCD screen.)
Press the ‘Clear/Back’ button to get to the ‘Reset Menu’
At the Reset Menu you can then scroll through the reset options for your printer’s toner cartridges. You will get reset options for all four colours (BK, C, Y, M). If your printer takes high yield and standard yield cartridges, there will be an option to reset either one.
Select the proper size and the colour of the toner cartridge you want to reset, then press OK.
Each cartridge must be reset individually. Press ‘1’ to reset.
Press ‘Clear/Back’ to get out of the menu, then close the door.
Hi Alan

Give this a try!

Reset Brother MFC-L2700dw Toner

Open the front cover and leave open while completing the following steps.
Display should read “Front Cover open”.
Hold the ‘OK’ button down for a few seconds.
Display should read “Replace Drum”.
DO NOT follow prompts on screen.
Type in * 0 0 (Star Zero Zero) on the keypad.
Close the cover. Your toner is now reset.

Regards
Mary
Need2Print Ltd

]]>